> Products > Clutch & Transmission >

  Billet Pinion Shaft Brace

Our Price: $139.00

Availability:: Usually Ships in 24 Hours
Product Code: 0101

At approximately 400lbs (545Nm) of torque, stress loads are high enough to make the input shaft twist and push outwards towards the clutch assembly. With heavy torque loads the shafts actually flex causing the teeth to not fully seat and will actually shear the tips off the gear itself. This is very common in third gear with O2A/O2J gear boxes.

VAP developed this robust solution which bolts from inside the bell housing. The transmission casing does not need to be opened and no machine work is required. Shaft flex is reduced and the gears are kept fully meshed together. This saves the gear tips from shearing under heavy torque loads and destroying the rest of the transmission in the process.

Since the part was installed on VAP's 800hp drag car, there have been zero failures. Protect yourself from big trouble and expense later.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Products > Clutch & Transmission

V1/V2/V3/V7 Supercharger Bracket Assembly $525.00
S2 Metalwerks VR6 Header $925.00
Schimmel Short Runner Intake Manifold with Elbow $1,175.00
Shifter Extension (One Inch) $25.00
Stainless Steel Oil Return Fitting $25.00
Stainless Steel Oil Feed Fitting $20.00
MKIV Supercharger Bracket Assembly $850.00
MKIV Auxiliary Drive Cogged Conversion w/Bracket Assembly $2,300.00